NAVIGATION TRACKER

AvtoOko24

Satellite car monitoring and remote control system 

58 Euro
Detailed description

A navigation terminal for personal use, developed on the basis of the controller "ARNAVI INTEGRAL" 3.

There are no functional differences between these devices. Tracker "AVTOOKO24" differs only special firmware, which implements algorithms to calculate the possible evacuation or theft. In addition, this device has the ability to connect the remote engine startup unit (immobilizer crawler) and the car preheating system.

One of the important fundamental differences of this terminal is the lack of its connection to the web-version of the software, only to the specialized mobile application "Avtooko24" with automatic creation of accounts, objects, billing and the ability to pay by card directly from the application.

This is a fundamentally new solution in the market of satellite monitoring, adapted for use by individuals - car owners, which, thanks to its loyal pricing policy is a good competition to satellite car alarms with autorun.

Specifications
Dimensions 70 х 53 х 22 mm
Supply voltage 8 - 40 V
Weight 52 g
Analog input 1 pcs.
Discrete input 3 pcs.
Discrete output 2 pcs.
Operating temperature range -40 ... +80 °C
RS232 interface yes
RS485 interface yes
1-WIRE interface yes
USB interface yes
Number of SIM card slots 1
Number of slots SIM chip 1
Non-volatile memory 32 Mb
Battery 100-1000 mAh

STANDALONE SATELLITE DEVICE

Arnavi Beacon

Designed for the vehicle theft protection, location detecting and monitoring of mobile freights

70 Euro
Detailed description

ARNAVI BEACON is an autonomous satellite device for determining location.

It can be installed on the monitoring object (for example, in a car), without connecting to the on-Board electrical network of the object.

In case of theft or control, the beacon makes it possible to determine the exact place where the object is.

To determine the location uses GPS/GLONASS navigation system, in cases where the object falls into the zone of absence of GPS signal (underground Parking, garage box), the location will be determined using LBS positioning technology. The device uses a standard size batteries - AA (finger).

Three modes are available to the user:

• Interval-communicates strictly according to the specified interval;

• Active - the event triggering the motion sensor (start of movement end of movement);

• Online-works on the principle of the tracker: working out the trajectory of the angle, speed, distance, time.

Specifications
Dimensions Diameter 78 mm, Height 23 mm
Box Protected by IP67 standart
Magnet mount Optional
Working temperature -40 ... +85 °C
Batteries Batteries АА 3 pcs
Sleep mode energy consumption No more than 1.2 microampere
Number of “wakes” for one power set Up to 6000*
Autonomous working period Up to 7 years
Built-in motion sensor Yes
BlueTooth Yes
2 Sim Yes, optional SIM chip
USSD support Yes

ENGINE START MODULE

Arnavi ESM-L

Universal module of remote engine start

58 Euro
Detailed description

ARNAVI ESM-L is a universal module remote start engine, developed by Russian programmers and engineers.

The equipment does not require the use of external crawlers of the standard immobilizer, it is able to carry out a temporary Keyless algorithmic bypass of the immobilizer on the CAN bus of the car at the time of remote engine start, without reducing the effective operation of the standard anti-theft systems.

Control is possible by using the standard remote control, keyfob any alarm or GPS tracker АvтоОко24. When using the module in the system АvтоОко24 the control is performed by using the developed specialized applications for the Android and iOS platforms. Using the mobile app АvтоОко24 possible not only to track the current location of the vehicle, but also to build routes, as well as to monitor other parameters (battery voltage of the vehicle, the cabin temperature (or engine) speed and the total mileage of the car).

Also in the mobile app AvtoOko24 the status of the open hood and doors will be available to display.

System remote engine start Arnavi ESM-P supports a wide range of vehicles with diesel and petrol engines. Among the supported brands there are: Lexus, Mazda, Nissan, Reanult, Toyota and others.

The module can also be used as a keyless immobilizer bypass module for all vehicles from the support list when working together with any remote-start security system.

Please ask company's managers for other supported vehicle models.

Specifications
Supply voltage from 10 to 18 V
Maximum current consumption not more than 150 mA
Protection against" reverse polarity "power yes
The duration of exceeding the permissible voltage 10 seconds
Protection against pulse surges V
Maximum pulse current 50A
Pulse duration 5 seconds
Box protection IP 53
Operating temperature range -40...+80

ENGINE START MODULE

Arnavi ESM-P

Universal module of remote engine start

58 Euro
Detailed description

ARNAVI ESM-P is a universal module remote start engine, developed by Russian programmers and engineers.

The equipment does not require the use of external crawlers of the standard immobilizer, it is able to carry out a temporary Keyless algorithmic bypass of the immobilizer on the CAN bus of the car at the time of remote engine start, without reducing the effective operation of the standard anti-theft systems.

Control is possible by using the standard remote control, keyfob any alarm or GPS tracker АвтоОко24. When using the module in the system АвтоОко24 the control is performed by using the developed specialized applications for the Android and iOS platforms. Using the mobile app АвтоОко24 possible not only to track the current location of the vehicle, but also to build routes, as well as to monitor other parameters (battery voltage of the vehicle, the cabin temperature (or engine) speed and the total mileage of the car).

Also in the mobile app AvtoOko24 the status of the open hood and doors will be available to display.

System remote engine start Arnavi ESM-P supports a wide range of vehicles with diesel and petrol engines. Among the supported brands there are: Lexus, Mazda, Nissan, Reanult, Toyota and others.

The module can also be used as a keyless immobilizer bypass module for all vehicles from the support list when working together with any remote-start security system.

Please ask company's managers for other supported vehicle models.

The module can also be installed on any car not included in the current support list when using the classic key crawler for a regular immobilizer and connecting all the necessary circuits on separate wires without using CAN bus.

Specifications
Supply voltage from 10 to 18 V
Maximum current consumption not more than 150 mA
Protection against" reverse polarity "power yes
The duration of exceeding the permissible voltage 10 seconds
Protection against pulse surges V
Maximum pulse current 50A
Pulse duration 5 seconds
Box protection IP 53
Operating temperature range -40...+80